General Purpose Clutch Products

AS Series

Formsprag AS Clutch

Model AS is a ramp & roller type clutch, non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing are required. Nominal outside dimensions are the same as a Series 62 ball bearing.

    • The inner race is keyed to the shaft (except for size 6 mm bore).
    • The outer race has a positive r6 tolerance to give a press fit in a H7 housing.
    • Can accept an axial misalign- ment of inner and outer race of ± S/2.
    • These clutches are oil dipped at the factory but must be filled to the proper level before operation.
    • This clutch is designed for oil lubrication . For grease lubrication, reduce the maximum overrunning speed to 50% of listed value.
    Formsprag Clutch
    23601 Hoover Rd.
    Warren, MI 48089 - USA
    Toll Free:1-800-348-0881 (Press #1)
    Web: CONTACT